BE-Line : Communication Line Replacement and Retrofit
The backbone of the the electrical system on any lift lies in the comline, but too often after years of use weather and fatigue broken pairs, shorts, unorganized termination crop their heads up causing for frustration and issues that can be solved with a new comline. But a new comline is only as good as the interface with the rest of the lift, which is where Bald Eagle Lifts come in. Whether by using easy access boots, simple effective and straightforward termination in the stations that includes lightning protection, or tower boot boards to enable easy termination and troubleshooting of deropement systems the BE-Line system allows the comline to be a headache free backbone of your lift for years to come. We offer both packages and individual pieces for retrofits on existing comlines or new comlines, whether the lift be a new install, a relocation, or simply a retrofit project. Regardless of manufacture or age of left let us put together a package that works best for you and removes headaches from the backbone of your lift.
Comline Termination Board/ Lightning Protection
Our Comline Termination Board enables a neat and proper termination for each and every pair of the comline. Making sure that all pairs are properly terminated is imperative to protecting the lift equipment from lightning or other problems that can come back down the comline. Everything is clearly labeled and there is a schematic that explains exactly what is being used on the board for lightning protection. Utilizing a resistor, poly-switch, trans-orb, gas discharge tube, and fuse these boards offer the best lightning protection on the market, in use they have worked flawlessly in protecting the lift equipment in the motor room and shack from any problems the com-line might face.
This board is magnetically mounted enabling easy installation and has quick connectors on each side easing installation and troubleshooting.
This board is magnetically mounted enabling easy installation and has quick connectors on each side easing installation and troubleshooting.
Tower Boot Connection Card
The best way to terminate a comline at the boot. Works with all types of
fixed grip lifts 24V systems. Provides not only an incredibly
convenient way to connect brittle bars and "Black Max" proxy switches
but also troubleshooting ability at the boot. You can immediately
see whether voltage is acceptable as well as check for a ground or open
by simply pressing the test buttons. Indicators also show whether the
fault is on the uphill or downhill assembly.
| boot_board_tutorial.pdf |